background image

- 8 -

EN

11. Information

Servicing

If this unit become inoperative, do not try to 

correct the problem by yourself.  There are no 

user-serviceable parts inside. Turn off, unplug 

the power plug, and please call our help line 

mentioned on page  to locate an Authorized 

Service Center.

Cabinet Cleaning

•  Wipe the front panel and other exterior sur-

faces of the VCR with a soft cloth immersed 

in lukewarm water and wrung dry.

•  Never use a solvent or alcohol. Do not spray 

insecticide liquid near the VCR. Such chemi-

cals may cause damage and discoloration to 

the exposed surfaces.

Auto Head Cleaning

•  This unit automatically cleans video heads 

as you insert or remove a cassette, so you 

can see a clearer picture.

•  Playback picture may become blurred or 

interrupted while the TV program recep-

tion is clear. Dirt accumulated on the video 

heads after long periods of use, or the usage 

of rental or worn tapes can cause this prob-

lem. If a streaky or snowy picture appears 

during playback, the video heads in your 

VCR may need to be cleaned.

.  Please visit your local Audio/Video store 

and purchase a good quality VHS Video 

Head Cleaner.

2.  If a Video Head Cleaner does not solve 

the problem, please call our help line men-

tioned on page  to locate an Authorized 

Service Center.

NOTES:

•  Remember to read the instructions included 

with the video head cleaner before use. 

•  Clean video heads only when problems 

occur.

Maintenance

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as 

follows :

DURATION : 

PARTS :  

 

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year 

from the date of original retail purchase. Certain parts are excluded from this warranty.

LABOR :

  

 

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the 

date of original retail purchase.

LIMITS AND EXCLUSIONS :

ThIs wARRANTy Is exTeNDeD ONly TO The ORIgINAl ReTAIl PURChAseR. A PURChAse ReCeIPT OR OTheR 

PROOF OF ORIgINAl ReTAIl PURChAse wIll be ReqUIReD TOgeTheR wITh The PRODUCT TO ObTAIN seRv-

ICe UNDeR ThIs wARRANTy.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing 

or if service was attempted by AN UNAUThORIZeD seRvICe CeNTeR. This limited warranty does not apply to any 

product not purchased and used in CANADA.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It 

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product 

not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, 

alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this prod-

uct or damage which results from fire, flood, lightning or other acts of god.
ThIs wARRANTy DOes NOT COveR PACKINg MATeRIAls, ANy ACCessORIes (exCePT ReMOTe CONTROl), 

ANy COsMeTIC PARTs, COMPleTe AsseMbly PARTs, DeMO OR FlOOR MODels.
FUNAI CORP. AND ITs RePReseNTATIves OR AgeNTs shAll IN NO eveNT be lIAble FOR ANy geNeRAl, 

INDIReCT OR CONseqUeNTIAl DAMAges ARIsINg OUT OF OR OCCAsIONeD by The Use OF OR The INAbIlITy 

TO Use ThIs PRODUCT. ThIs wARRANTy Is MADe IN lIeU OF All OTheR wARRANTIes, exPRess OR 

IMPlIeD, AND OF All OTheR lIAbIlITIes ON The PART OF FUNAI, All OTheR wARRANTIes INClUDINg The 

wARRANTy OF MeRChANTAbIlITy AND FITNess FOR A PARTICUlAR PURPOse, ARe heReby DIsClAIMeD by 

FUNAI AND ITs RePReseNTATIves IN CANADA.
All wARRANTy INsPeCTIONs AND RePAIRs MUsT be PeRFORMeD by AN AUThORIZeD seRvICe CeNTeR. 

ThIs wARRANTy Is ONly vAlID wheN The UNIT Is CARRIeD-IN TO AN AUThORIZeD seRvICe CeNTeR.
The PRODUCT MUsT be ACCOMPANIeD by A COPy OF The ORIgINAl ReTAIl PURChAse ReCeIPT. IF NO 

PROOF OF PURChAse Is ATTACheD, The wARRANTy wIll NOT be hONOReD AND RePAIRs COsTs wIll be 

ChARgeD.

ATTENTION :

FUNAI CORP. ReseRves The RIghT TO MODIFy ANy DesIgN OF ThIs PRODUCT wIThOUT PRIOR 

NOTICe.

To locate your nearest AUThORIZeD seRvICe CeNTeR or for general service inquiries, please contact us at :

FUNAI CORPORATION

Customer Service

Tel: 1-800-605-8610

http://www.funai-corp.com

9900 Van Ness Avenue, Torrance, CA 9050

CMWV405_HJ34RCD_EN.indd   8

2006/0/23   6:20:34

Summary of Contents for CMWV405









Reviews: