Network updates
You can update the software by connecting the unit to the Internet.
1
Press
Z
and use
J
K
to Select
Setup
then press
OK
.
2
Use
H
I
J
K
to Select
Update software
, then press
OK
.
3
Use
H
I
to Select
Network
, then press
OK
.
4
Use
J
K
to Select
Yes
, then press
OK
.
●
This unit will then start checking for the latest FirmWare (software)
version.
5
Confirmation message will appear.
Use
J
K
to Select
Yes
, then press
OK
.
●
The unit will start downloading the latest FirmWare (software)
version.
●
The unit will start updating the FirmWare (software) version.
●
It may take a while to complete the updating.
6
When the software update is complete, press
B
to make sure the
unit goes to Standby mode.
7
Unplug the AC power cord for a few seconds from AC outlet and
plug it again.
8
Press
B
again to Turn the unit On.
●
The TV starts up with the new software.
For further assistance, please contact Call Center.
Note(s)
●
In order to update software via the Internet, you must connect the unit to the Internet
and set up necessary settings.
●
Please do not unplug the AC power cord or Ethernet Cable while executing the
Network
updates
.
●
All settings will remain the same even if you update the software version.
●
The version of Net service will also be updated if newer version of Net service is available
when updating the firmware.
●
When you start up the TV or a net service after executing the software update, a message
may appear on the screen prompting for software update again. In this case, please select
Update
to start USB update or network update. For further assistance, please contact call
center.
Software settings
Software
1
Press
Z
and use
J
K
to Select
Setup
then press
OK
.
2
Use
H
I
J
K
to Select
Software settings
, then press
OK
.
3
Use
H
I
to Select
Software
, then press
OK
.
Checking your current Software version
1
Use
H
I
to Select
Software information
.
●
The version and a description of the current software is displayed.
Software auto-update
You can download the latest software through the air and update this unit
automatically while the unit is in standby mode.
1
Use
H
I
to Select
Software auto-update
, then press
OK
.
2
Use
H
I
to Select the desired option, then press
OK
.
Off
Disable auto-update for latest software.
On
A message will appear if there is the latest software
on the network server.
License
Displays the Licenses of Open Source Software used in this unit.
1
Use
H
I
to Select
License
, then press
OK
.
●
Licenses of Open Source Software used in this unit are displayed.
Digital rights management
This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
1
Use
H
I
to Select
Digital rights management
, then press
OK
.
●
Digital rights management is displayed.
45
.
English
Continued on next page.
