S
OUND
M
ENU
C
ONTROLS
Using the Sound Menu Control
T
o adjust your TV sound, select and use the Sound
Menu Controls listed below:
1
Treble:
Press the CURSOR
˙
or
˝
buttons to
adjust the control. The control will enhance the
high frequency sounds.
2
Bass:
Press the CURSOR
˙
or
˝
buttons to
adjust the control. The control will enhance the
low frequency sounds.
3
Balance:
Press the CURSOR
˙
or
˝
buttons
to adjust the level of sound coming from the left
and right speakers.
4
AVL:
(Auto Volume Leveler) Press the CURSOR
˙
or
˝
buttons to turn the control On or Off.
When On, AVL will level out the sound being
heard when sudden changes in volume occur
during commercial breaks or channel changes.
5
Incr. Surround:
Press the CURSOR
˙
or
˝
buttons to select between Dolby Virtual or Stereo
settings (If Stereo), or select Spatial or Mono (If
Mono).
6
SAP:
Press the CURSOR
˙
or
˝
buttons to
toggle this control to On or Off. SAP is short
for Secondary Audio Programming and is sent as a
third audio channel, a SAP signal can be heard
apart from the current TV program sound.Note: If
SAP is not present on a selected show No SAP
will appear on the screen.
7
Stereo:
Press the CURSOR
˙
or
˝
buttons to
select between Stereo or Mono settings. Note: If
Stereo is not present on a selected show and the
TV is placed in the Stereo mode, the sound coming
from the TV will remain in the Mono mode.
8
Alt Audio Program:
Press the CURSOR
˙
to select the appropriate language.
9
Bass Boost:
Press the CURSOR
˙
or
˝
buttons
to toggle this control to On or Off. The Bass Boost
control allows you to increase the low-frequency
range of the TV’s sound. This creates a deeper, fuller
sound.
To switch between Digital and Analog channels, use
the A/D button on the Remote Control.
H
ELPFUL
H
INT
19
* Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol
£
are trademarks of Dolby Laboratories.
