10
Setting your location to home
You can set the location of your TV to
Home
or
Retail
.
Choosing
Home
gives you full flexibility to change
predefined settings for picture and sound.
1
Press
MENU
and use
▲▼
to select
Features
, then
press
OK
.
2
Use
▲▼
to select
Location
, then press
OK
.
3
Use
▲▼
to select
Home
, then press
OK
.
* This function may not be available depending on the
product you have.
Viewing photos and watching videos
on a USB memory stick
Your TV is fitted with a USB connection that enables you to
view photos or watch videos (Motion JPEG files) stored on
a USB memory stick.
1
Press
MENU
and use
▲▼
to select
USB
, then press
OK
.
• The highlighted text will move to the name of your USB
memory stick, then press
OK
again.
2
Use
▲▼
to select the
Picture
or
Video
, then press
OK
.
• The files recorded under the following specifications are
required.
5 Install channels
Autoprogram
Be sure the RF cable is correctly connected to this unit and
you are registered with your cable TV provider when you
install Cable channels.
1
Press
MENU
and use
▲▼
to select
Setup
, then press
OK
.
2
Use
▲▼
to select
Autoprogram
, then press
OK
.
• If you run
Autoprogram
when you have locked channels, a
message appears asking to enter your PIN. Enter your PIN in
order to complete the installation. You need to set the
channel lock again after the installation.
3
Use
▲▼
to select an appropriate option, then press
OK
.
• When
Antenna
is selected, the TV detects any off-the-air
antenna signals. It searches for ATSC (Digital) and NTSC
(Analog) channels available in your area.
• When
Cable
is selected, the TV detects signals supplied by
cable. It searches for ATSC (Digital), NTSC (Analog) and
Cable channels available in your area.
• When the scanning and memorizing channels are
completed, the lowest memorized channel will be displayed.
4
Follow the on-screen instructions to complete the
installation.
Canadian
English
rating
Canadian
French
rating
Description
All
Locked all ratings
E
Exempt program
C
–
For all children
C8+
–
For children over 8
G
General audience
–
8ans+
Unsuitable for ages under 8
PG
–
Parental guidance suggested
–
13ans+
Unsuitable for ages under 13
14+
–
Unsuitable for ages under 14
–
16ans+
Unsuitable for ages under 16
18+
18ans+
Adult audience only
Note
• The V-Chip can block non rated programs as per “CEA-608-E
sec. L.3”. If the option to block
NR
,
None
, or E programs is used
in
US movie ratings lock
,
US TV ratings lock
,
Canadian English
rating
or
Canadian French rating
accordingly “unusual results may
occur, and the unit may not receive emergency bulletins or other
types of programming” : Emergency Bulletins (Such as EAS
messages, weather warnings and others) / Locally originated
programming / News / Political / Public Service Announcements /
Religious / Sports / Weather.
Note
• You must set
Home
. Otherwise, personalized picture and sound
settings will not be memorized after the unit goes into Standby
mode.
Picture
Sound
Setup
Features
Language
USB
Caption settings
Child lock
PC settings
fun-Link (HDMI CEC)
Location
E-sticker
Software upgrade
Home
- -
*
Picture (JPEG)
Upper limit 24Mpixel
Video
(Motion JPEG)
Size
320 x 240 (QVGA)
Frame rate 30fps
Audio type LPCM
Sampling frequency
(32 kHz, 44.1 kHz or 48 kHz)
Quantization bit rate (16 bit)
Note
• We cannot be held responsible if your USB memory stick is not
supported, nor will we accept any liability for damage or loss of
stored data.
• The USB memory stick is not supplied with this TV.
• A file name exceeding 128 characters or contains a dot character
is not supported on this TV.
• Progressive JPEG files are not supported.
• Only a Motion JPEG file with an “.avi” extension is supported.
An extension “.mov” is not supported.
• During Motion JPEG playback, “Pause”, “Forward” and “Reverse”
do not work on this unit.
Cable
Or
Picture
Sound
Setup
Features
Language
USB
Antenna
Back
Cable
Antenna
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Select your signal source.
ANTENNA IN
A3AUBMA_A3ATBMA_A3AFFMA_OM.book Page 10 Tuesday, February 5, 2013 3:19 PM
