4. When the software upgrade was successful, remove the USB
portable memory (not supplied) and restart your TV with the
power switch
at the right side of the TV. Your TV will start up
with the new software.
Fig. 8-5
5. When the software upgrade was successful, remove the USB
portable memory (not supplied) and restart your TV with the
power switch
at the right side of the TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV
software from your USB portable memory (not supplied).
Manual software upgrade procedure
For a manual software upgrade copy the autorun.upg file in a
directory called Upgrades located in the root of the USB
portable memory (not supplied).
1. Insert the portable memory (not supplied) that contains the
downloaded software upgrade.
2. Select Software Upgrade in the Installation menu. Go to Local
upgrades/applications. The TV will list all compatible images
available on the USB portable memory (not supplied) and display
the data for each selected upgrade image.
3. Select the correct upgrade image and press the red color button to
start the upgrade. Your TV will restart and will automatically go to
the upgrade mode. After a few seconds it will display the status of
the upgrade procedure.
If you try to upgrade to a software version equal or lower than the
current version, a confirmation will be asked. Downgrading to older
software should only be done in case of real necessity.
Warning:
"
"
"
"
