Magnavox 40ME314V, Owner'S Manual

Page: 23 / 39

Sound
Before you begin:
You must set Location to Home . L p. 31
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press MENU and use
H I
to select Sound , then press OK .
USB
Language
Features
Setup
Sound
Picture
Stereo
Multichannel
On
Off
On
Standard
Primary MTS
Digital output format
TV speakers
Auto volume leveling
DTS TruSurround
Equalizer
Auto sound
2
Use
H I J K
to select the item you want to adjust, then press
OK
.
Auto sound
to select the desired setting, then press OK .
( Personal , Standard , Vivid , Sports , Movie , Music
and News )
When you adjust the following settings
( Equalizer , DTS TruSurround and Auto volume
leveling ), Personal sound will be set
Automatically when Location is set to Home .
Adjust the tonal quality for each frequency.
Equalizer
Cursor I Cursor H
to adjust each level of tonal quality.
Press
BACK to go back to the previous menu.
This selects Sound Modes for more spatial or Surround Sound
reproduction.
DTS TruSurround
Off
to set DTS TruSurround™ to
Off
On
to set DTS TruSurround™ to On
This function keeps a constant loudness level between the TV
commercials and the Programs.
Auto volume
leveling
Off
to Remove the Auto volume
leveling
On
to Reduce Volume Differences
between the TV Commercials and
the Programs
You can select the Audio Output from the Unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this Unit, some sound operations such as volume up can be
changed by using this Unit’s Remote Control.
TV speakers
On
to Output Sound from the Unit’s
Speakers
Off
No Output Sound from the Unit’s
Speakers
CEC Link
to Control Audio Output from
your connected fun-Link (HDMI
CEC) Compliant Devices with
VOL + / –
by using this Unit's
Remote Control.
You can select Audio Output through a Digital Audio Output connector.
Digital output
format
Multichannel
to Output Multichannel Signals
(When the Audio of the Content
is PCM, it will be Output in PCM
even if
Multichannel is selected.)
PCM
to Output PCM format.
You can set the Output mode as a default for the Sound mode (Analog
TV only).
This setting is not interlocked when you change the Output mode by
pressing
SAP . Refer to Switching Audio Mode . L p. 18
Primary MTS
Stereo
to Output Stereo Audio
Mono
to Output Mono Audio
SAP
to Output Second Audio Program
23 .
English
Continued on next page.