Magnat Audio MCD 550, Important Notes For Installation & Warranty Card

Page: 10 / 32

10
• The transparent protective tab on the
underside of the battery compartment
must be removed before using the
remote control.
• If the batteries have run out after
prolonged use, please replace them
(type CR2025).
• To prevent causing damage to the
remote control please remove the
batteries if the device is not going to be
used for a prolonged period.
1 MASTER / 2 CD
Switches the device on when it is in
the standby mode. If the LED does not
illuminate, actuate the power switch
located on the rear of the device.
Conversely the device can be switched
from power operation to the standby
mode.
The MASTER button also switches other
units in Magnat‘s M500/M400 series
(MT 520, MA 400, MT 420) on and off.
3 SEARCH
High-speed rewind and fast forward.
• Press once: Double speed fast forward/
rewind.
• Press twice: Sixfold speed fast forward/
rewind.
• Press again or PLAY: Ends fast forward
or rewind and returns to CD playback.
4 SKIP
Playback starts at the beginning of the
current or next track.
Pressing the left button twice starts
playback at the beginning of the previous
track.
5 EJECT
Opens the CD compartment.
6 PLAY
Starts the playback from a CD.
REMOTE CONTROL
7 PAUSE
Pauses the playback from a CD.
8 STOP
Stops a CD that is playing.
9 NUMERICAL BUTTONS
Direct selection of a track.
10 REPEAT
Track/CD repeat playback (repeat
function):
• Press once: The current track is
repeated.
The following appears in the display:
rep ONe
• Press twice: The entire CD is repeated.
The following appears in the display:
rep all
• Press again: The repeat function is
deactivated. The following appears in
the display:
rep Off
11 RANDOM
Plays the titles of a CD in random order.
• Press once: The function is deactivated.
The following appears in the display:
rNd-ON
• Press again: The function is activated.
The following appears in the display:
rNd-Off
The non-numbered buttons are reserved
for operating the Magnat amplifier
MA 400 and the Magnat Tuners MT 520
and MT 420 and have no function for the
MCD 550.