7
OPERATION
6. When the timer counts down to zero (0), the
cleaning process stops automatically and the
display shows 000.
7. If you need to end the process ahead of time,
press the ON/OFF button. If you need to
repeat the cycle or to increase the time, press
the SET button to select desired time then
press ON/OFF button again to restart it.
Important:
Long cycle time will cause heat to
build up inside the unit and water temperature to
rise. Do not use the unit for more than 20 minutes
continuously. Take a10-minute break in between to
prolong the life of the unit.
8. When cleaning is done, open the cover, and
remove the items.
9. Empty the tank by pouring out the water in the
direction shown with arrow on the unit. Avoid
pouring it over the front where the control
panel is located. Wipe the tank clean and
remove the power plug.
Note:
To avoid residue building up, always empty
the tank and wipe it clean. Recommend using fresh
water each time.
10. Store the unit in a cool and dry place.
Summary of Contents for UC71
Page 14: ...WWW MAGNASONIC COM...
