- 7 -
SETTING UP
Setting up the System
Once you have taken the system out of the box, you can set it up in 2 different ways,
sideways on a shelf, or upright anywhere with the included console stand. It is very
important to use the stand if you are installing your system upright. The stand keeps
the console stable, knocking the console over could cause it to malfunction.
SD Card Installation
Upon startup, if you have not already done so, the system will prompt you to insert the
included SD card.
1. Remove the SD card from the protective case.
2. Insert the SD card in the SD card slot on the back of the system console. Observe
the SD card icon beside the card slot to put the card in the proper way.
3. Push in the card until you hear a click and it is locked in place.
4. This card should always be left in the system console, you cannot play games
without it.
Power and AV Plugs
This console requires that it is plugged into a TV or monitor for game play.
1. Attach the red, white and yellow AV cable to the 3 jacks on the back of the video
gaming console, paying close attention to color coordinate the plugs.
2. Plug the other end of the AV cable into the AV in jacks on the back of the TV you
wish to play on.
3. Attach the 9V DC adapter to the DC in jack on the back of the console, and attach
the other end of the adapter plug into any available wall outlet.
Powering ON
1. Press the blue power button on the front of the video gaming console.
2. The blue power LED indicator will illuminate, letting you know the system has
power.
Controller Battery Installation
The controllers included in this system are completely wireless, they require 3 AAA
batteries each to operate. (batteries not included)
1. Remove the battery compartment cover on the back of the controllers with a small
cross head screwdriver.
2. Install 3 AAA batteries into each controller, paying close attention to correct
battery polarity.
3. Once installed, replace the battery compartment cover.
YOU ARE NOW READY TO PLAY!
