－１－
Total
darkness
or
a
re flection
on
the
picture
screen
can
cause
eyestrain
．
Soft
and
indirect
lighting
is
recommended
for
comfortable
viewing
．
Allow
enough
space
between
the
receiver
and
the
wall
to
permit
ventilation
．
Avoid
excessively
warm
locations
to
prevent
possible
damage
to
the
cabinet
or
premature
component
failure
．
This
TV
receiver
can
be
connected
to
an
AC
power
outlet
of
１２０
V
and
６０
Hz
．
Never
connect
to
DC
supply
or
any
other
power supply
．
Do
not
install
the
receiver
in
a
location
near
heat
sources
such
as
a
radiator
，
air
ducts
or
direct
sunlight
．
Do
not
cover
the
ventilation
openings
when
using
this
television
．
1. Introduction
Position
the
receiver
in
the
room
where
direct
light
does
not
strike
the
screen
．
INSTALLATION
CAUTION
Thank you for your purchase of this Magnasonic product. Please read this
Instruction Manual carefully before using product to ensure proper use.
Keep this manual in a safe place for future reference.
Never tamper with any components inside your television, or any other
adjustment controls not mentioned in this manual. All television receivers are
high voltage instruments. Please avoid any unnecessary strain to your
television, such as: scratching, chipping, or resting heavy objects on the
cabinet top. Scratching, tipping or undue pressure is dangerous and should be
avoided. This unit should never be cleaned while plugged into a power
receptacle. To clean the unit, first unplug the power cord from the power
receptacle, then wipe down the PICTURE TUBE FACE and CABINET with a soft
damp cloth and a mild cleaning solution. Make sure to completely dry off the unit
before plugging it back into a power receptacle. During thunder and lightning,
unplug the power cord and antenna cord to prevent your TV set from damage.
All “inside work” on your television should be performed by a qualified service
technician.
