Magnaflux D-2000 Series, Operation Manual

Page: 27 / 58

D-2000 Series Revised March 2020
Page | 3-7
a. Slower clamping speed allows operator greater flexibility in positioning large, heavy or awkwardly
shaped parts.
b. Faster clamping speed improves productivity for simple, repetitive parts.
Autobath Retracted Limit Switch (1): Initiates a magnetizing current “shot” when the bath applicator reaches
the switch position, on its return stroke.
Autobath Extended Limit Switch (2): Controls the extended length of the bath applicator.
· Loosen set screws and adjust position for length of part being inspected.
Bath Application Solenoid (3): Turns the bath on when applicator is extended, off when retracted.
DAILY START UP AND OPERATION CHECKLIST
All controls and indicators are illustrated in Figures 3-2, 3-3, 3-4, and 3-5.
1. Turn on external disconnect switch. Digital Ammeter and power indicator will light.
2. Check for proper volume of bath; see Table 1-6 in Section 1.
3. Press PUMP push-button to turn on and allow bath to circulate for a minimum of 15 minutes.
4. Check for proper magnetic particle concentration in bath; see Table 2-5 in Section 2.
5. Allow black light to warn up for approximately 5 minutes.
Figure 3-6 AUTOBATH (Optional)