background image

3

Using The Transmitter To Arm The Security System

1. Exit the vehicle and close all entrances.
2. Press and release the LOCK button on the transmitter. The security system will respond as follows:

A. The horn/siren will chirp one time. 

B. The LED indicator will begin to flash at a steady rate.

C. The parking lights will flash one time.

D. All protected entrances are armed. 

The security system is now fully armed!

Security System Operation

Arming the Security System without Using The Transmitter

Note: The following information is valid only if your security system has been programmed to
automatically arm. 

1. Turn off the ignition key and exit the vehicle.
2. Close all protected entrances. After the last protected entrance is closed the horn/siren will chirp

one time and the LED indicator will begin to flash fast. The fast flashing LED indicates that the
automatic arming timer is counting down and the security system will become armed within 30
seconds. After 30 seconds has passed, the security system will respond in the following manner:

A. The horn/siren will chirp one time.

B. The LED indicator will begin to flash slower.

C. The parking lights will flash one time.

D. All protected entrances are armed.

Note 1: Re-opening a protected entrance before the system becomes armed will stop the arming
timer. After closing the entrance the timer will begin counting again from zero.

Note 2: If the vehicle has a delayed interior lighting system, the automatic arming timer will start
counting after the interior lighting has turned itself off. This could add up to 45 seconds to the total
automatic arming countdown time. (Up to 75 seconds total arming delay)

The security system is now fully armed!

Automatically Arming the Security System

Disarming the Security System Using the Transmitter

1. Press and release the UNLOCK button on the transmitter. The security system will respond as follows:

A.   The horn/siren will chirp two times. 

B1. The LED indicator will be off. (Only if Auto Arming is programmed “Off”)

B2. The LED indicator will be flashing very fast. (Only if Auto Arming is programmed “On”)

C.   The parking lights will flash two times. 

Note: If you are disarming the security system after it has been triggered and the horn/siren is
sounding, the disarm chirps are automatically deleted.

Note: The following procedures are based on Dedicated Button Mode programming.

Summary of Contents for Marksman M4













Reviews: