background image

Alarm Clock Operation 

(LS9600UCDW/S Only)

Setting the Clock and Alarm Times:

1. Press and hold the set button until the clock hours begin to flash.
2. Press the up or down buttons to correctly set the hours. Pay

attention to the AM and PM indicators in the display to make
sure you're setting the right time of day.

3. Press the set button a second time. The minutes display will

begin to flash. Press the up or down buttons to correctly set
the minutes.
Note: If you do not want to make alarm settings at this time,
do nothing for 10 seconds and the setting mode will exit.

4. Press the set button once again and the hours and "Alarm

1" indicators will flash.

5. Press the up or down buttons to correctly set the hours. Pay

attention to the AM and PM indicators in the display to make
sure you are setting the right time of day.

6. Press the set button a second time. The minutes display will

begin to flash. Press the up or down buttons to correctly set
the minutes.
Note: If you do not want to make "Alarm 2" settings at this
time, do nothing for 10 seconds and the setting mode will exit.

7. Press the set button once again and the hours and "Alarm

2" indicators will flash.

8. Press the up and down buttons to correctly set the hours.

Pay attention to the AM and PM indicators in the display to
make sure your are setting the right time of day.

9. Press the set button a second time. The minutes display will

begin to flash. Press the up and down buttons to correctly
set the minutes.
Note:You can make or change "Alarm 1" and "Alarm 2" set-
tings at any time but you must scroll through the clock set-
ting sequence first. Press and hold the set button until the

5

CONTROLS AND FUNCTIONS

hours begin to flash then press the set button 2 more times
to get to "Alarm 1" setting or press the set button 6 times to
reach "Alarm 2" setting.

Activate the Alarm:

Once the alarm times have been set, press "AL1" and/or "AL2"
buttons to turn on the alarm(s). "ALARM 1" and/or "ALARM2"
will be indicated in the display.

Activate the Snooze Alarm:

Once the clock alarm has gone off, you can press the snooze
button and it will temporarily stop the alarm from sounding for
9 minutes and then the alarm will sound again. Repeated
pressing of the snooze button will delay the sounding of the
alarm for another 9 minutes.

To Turn Off the Alarm:

Once the clock alarm is sounding, press the "AL OFF" button
(4) and the alarm will turn off. The "ALARM 1" and/or "ALARM
2" will remain displayed and the alarm clock will go off again in
24 hours. To eliminate the clock alarm operation, you must
press the "AL 1" and/or "AL2" button (11) to remove the alarm
indicators in the display.

Using the Sleep Timer:

To use the sleep timer repeat the following steps:

1. Press the power button (8) to turn the unit on.
2. Select the music source using the source selection knob (17).
3. Select the radio station or CD track you wish to fall asleep to.
4. Press and hold the "SLEEP" button. The display will change

to "120" momentarily. Continue to hold the sleep button down
to select the amount of time you wish the unit to play before
it shuts off. Sleep times can be selected from 120 minutes
down to 10 minutes in 5 minute segments. Once the time
duration is set release the "SLEEP" button.

5. Press the "SLEEP" button once again to activate the sleep

function. The "SLEEP" indicator will light up in the display.

LS9600UCDW/LS8600UCDW Manual  5/29/02  11:07 AM  Page 5

Summary of Contents for LS8600UCDW













Reviews: