background image

Using the Compact Disc Program Feature:

If you desire to have the song selection of the disc played in a
different order than arranged on the disc, repeat the following
procedures to program the playing order. 

1. When the CD disc is stopped, press the PROGRAM button

(10). The  PGM indicator will be displayed (15).

2. Use the skip down button        (8) or skip up button         (9) to

select a specific track Press the program button to lock in the
selection.

3. Repeat step #2 to program the the listening order of the tracks

on the disc, you can program up to a maximum of 21 tracks. 

4. After all the tracks required are programmed, press the

PROGRAM button (10) once again to lock the program.
The compact display will then display the play order you
programmed. 

5. Press the play button        (6) to play the new program.

5

CONTROLS AND FUNCTIONS

REPEAT

ALL

Note 1: Pressing the Stop button (7) will stop the play function
but will not erase the program sequence. Press the PROGRAM
(10) button, then the Play button (6) once again this will start the
play/program function from the first programmed track.

Note 2: Opening the CD door, changing the source selection
to AM/FM or shutting the power OFF on the unit will clear the
program memory.

Using the Compact Disc Random Feature:

The random feature allows the disc player to select and play the
songs on the disc in random play order.

1. To initiate the random feature, insert a disc and close the CD

door. Press the RANDOM button (16) before pressing the play
button (6). Press Play (6) and the disc will play.  

2. To turn off the random function press the RANDOM button (16)

once again. 

Note: You can activate and deactivate the random feature at any

time by pressing the RANDOM button (16).

REPEAT

ALL

PGM

PGM
Indicator

LS4000CDINS  6/17/05  2:48 PM  Page 5

Summary of Contents for LS4000B Linear Series













Reviews: