FM Tuner
Press the mode select button to switch to the FM tuner function. Use the Previous or Next buttons to
select a stored channel
Tuning and Storing stations
Use the Forward/Reverse seek buttons to manually tune the frequency in steps of 0.05MHz.
Alternatively, press and hold the Forward/Reverse seek buttons to auto search for available stations.
Upon finding a station, the auto search will stop, giving the option to store this station. At this point,
pressing the PLAY/PAUSE button will flash a “00” channel number in the display. Use the
Previous/Next buttons to select an appropriate channel memory. Press PLAY/PAUSE again to
confirm and store the station into the selected channel memory.
Auto search can be stopped at any time by pressing the Forward/Reverse seek buttons
Mute ON/OFF
Pressing the MUTE ON/OFF button will mute the output of the audio player.
USB to Recorded Internal Alarm Message
This is used to download any MP3 message or new configuration to the amplifiers internal memory.
To record a message please make sure your file is in an MP3 format. Connect the amplifier to your
USB of your computer with the amplifier switched off. Your computer will automatically load in the
mp3 player. The amplifier comes with a default alarm noise and config file. DO NOT DELETE THE
CONFIG FILE AS THIS WILL STOP THE MP3 TRIGGER FROM WORKING. Delete the default Mp3
File on the amplifiers MP3 Player and drag your saved MP3 file from computer to the MP3 player on
the amplifier. This will then become the new recording when the alarm trigger is activated
Alarm Trigger
This will play the message from the internal alarm by simply shorting the two contacts together. This
can be done via an alarm board, PIR or a simple switch connected to the amplifier. Once the alarm
has been triggered if the alarm has been given priority it will mute all the other inputs to their minimum
levels and play the per recorded message
Stand-By
Press Stand-By button on remote to put amplifier in to stand-by mode.
