BLUEPIRAT2 | USER MANUAL/
page 14 of 82
5.2
Model versions of BLUEPIRAT2 / BLUEPIRAT2 5E
The BLUEPIRAT2 supports a lot of bus systems which can be recorded by the data logger. This
table shows which model of the BLUEPIRAT2 supports which number of interfaces and chan-
nels.
Table 5.1: Model versions of BLUEPIRAT2 / BLUEPIRAT2 5E
The model name gives a hint to the integrated interfaces, e.g., BLUEPIRAT2 150M14C8LFR: 1x
MOST150, 12x HS-CAN, 2x LS-CAN, 8x LIN, 2x FlexRay a/b, 1x 1-Gbit-Ethernet and 4x 100-
Mbit-Ethernet interfaces. Low Speed and High Speed CAN are counted only as CAN. The vari-
ous interfaces are explained in later chapters.
Attention:
Based on the specification of the hard drive, the data logger should always be fitted verti-
cally or horizontally (upright or upside down).
Please avoid tight bending of the MOST150 fiber optic cables.
