Magna-Matic Corporation - W4599 County Road IW - Waldo WI 53093 USA - Phone: (920) 564-2366 - FAX: (920) 564-2368 - Toll Free USA & Canada
1-800-328-1110
http://
www.magna-matic.com
- email: [email protected] © Copyright 2023 All rights reserved
Quick Setup Guide
WARNING
WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, AND PERSONAL INJURY.
CAUTION
TURN OFF AND UNPLUG
BEFORE SERVICING
Page 9
Dust Collector Location for MAG-8200 Series
and MAG-10400 Stand Differences/Changes
IMPORTANT STAND NOTE:
The MAG-8200 Series mounts in the
same oriention as the MAG-8000. So
when you follow your MAG-10400
Stand instructions on page 14.
The yellow base of the MAG-8200 is
not threaded so the mounting to the
stand is with a through bolt 1/4”.
The 10400-04 balancer arm base is a
little longer now for the new
MAG-8200 series.
IMPORTANT DUST COLLECTOR NOTE:
The MAG-8200 Series mounts needs
the MAG-200 Dust Collector
mounted under the grit guard. So it
is mounted on the opposite side that
it was for the MAG-8000.
For the MAG-8200 we have moved up
to a 4” diameter grit guard inlet and
4” diameter yellow spiral hose.
