Magna-Matic MAG-8000 Series, Operating Instructions Manual, Page: 6 / 28

page page page page
5
MAG-8000 Assembly
Step 2:
First remove the TRANS -
PORT BRACKET from the
MAG-8000 arbor, keep
the transport bracket
for any future shipping
needs. You will need to
remove the black bolt -
ing bar to allow clear-
ance for the transport
bracket to be removed.
Use the spanner wrench
if needed to remove the
arbor nut. Assemble the
crank handle, align the
set screw to the milled
flat on the threaded adjustment rod, and use the Bondhus 1/8”
wrench to tighten the set screw.
Step 3:
Mount a grinding
wheel to the MAG-
8000 arbor. One inch
wide wheels are best
used with conventional
lawn mower blades,
and the half-inch wide
wheels are required
for mulching blades.
NOTE: when mounting
the half-inch grind-
ing wheel the ARBOR
SPACER is required.
The ARBOR SPACER is
NOT required for 1 inch wide wheels. See above diagram.