21
www.magmaweld.com
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
SMART SERIES / SMART SERİSİ
EN
3.1 Settings in the Bag
OPERATION
Operation
1
2
3
4
5
6
As long as the button is pressed, the wire is driven and the gas valve does not work. You can use this button to
drive the wire into the torch.
As long as the button is pressed, gas flow is ensured and wire feed does not work. You can use this button after
gas change.
Welding method is selected. Each press of the button enables a transition between the lines in the relevant
column. When the welding method is selected, the relevant led will light.
1-) WIRE FEEDING
2-) GAS FLOW
3-) WELDING METHOD SELECTION
Setting Range
• MIG/MAG
• Pulse MIG/MAG
Pulse welding method is only available in models with pulse. In no pulse( W/O Pulse) models,
when this line is reached, the led will not light and Pulse will not be active.
According to the welding method chosen you need to adjust your connections and accessories.
There is a separate outlet for the MMA method in front of the machine.
• MMA
In Lift TIG welding method, suitable apparatus should be used for torch connector connection.
Thanks to the special apparatus, it will be compatible with the Euro connectore.
• Lift TIG
Summary of Contents for SMART Series
