RA 300 E / RA 400 E / RA 650 E
2
IDENTIFYING SAFETY INFORMATION
These symbols are being used to identify potential risks.
When seen a safety symbol in the manual, it must be understood that there is an injury risk and following
instructions must be read carefully to avoid potential risks.
While welding, keep the third persons and especially the children away from the work area.
UNDERSTANDING THE SAFETY WARNINGS
Read carefully the manual and the labels and the safety warnings on the machine.
Make sure that the warning labels positioned on your machine are in good order. Renew the damaged and
the missing labels.
Learn to operate the machine and how to make the controls properly.
Operate your machine in convenient work areas. Improper modifications affect the safety of your machine
negatively and shorten its lifetime.
SAFETY RULES
ELECTRICAL SHOCK C
FATAL
AN BE
Installation procedure must comply with national electricity standards and other relevant
regulations and ensure that installation is performed by qualified persons.
Wear dry insulating gloves
and body protection.
Do not touch electrode with bare hand. Do not wear wet or damaged gloves and
body protection.
Do not touch live electrical parts
Never touch electrode while in contact with working surface, ground or another
electrode which is connected to a different machine
free of damage
.
.
Protect yourself from electric shock by insulating yourself from work and ground.
Use non-flammable, dry insulating material if possible, or use dry rubber mats, dry
wood or plywood, or other dry insulating material big enough to cover your full area
of contact with the work or ground, and watch for fire.
Never connect more than
electrode to the
.
one
electrode holder
Turn off the machine, when not in use
Disconnect input plug or
power before working on
machine.
Frequently inspect input power cord for damage or bare wiring - repair or replace
cord immediately if damaged.
Be sure
ground
.
swtich off the
the
that the machine is properly
ed.
HOT PARTS CAN CAUSE SEVERE BURNS
Do not touch hot parts
Allow cooling time before servicing
hot parts, use appropriate tool, insulating gloves and fireproof clothes.
.
.
If needed to hold
OBEY ALL THE SAFETY RULES
STATED IN THE MANUAL!
