Magmaweld Monomig 200ik, User Manual

Page: 17 / 84

17 monoMIG 200ik
EN
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
1-2
3-4
5
6-7
8
12
16
Adjustment Pots
Used to set the wire speed and voltage values for the desired welding.
Digital Panel
Shows the numerical value of the selected welding parameter, current and voltage value during
welding, idle wire speed and idle set voltage.
Sub Menu
To set the welding parameter times,
Pre 0.0/10.0 s Pre-Gas Duration Brn 0.0/100 ms Burnback Duration
Pos 0.0/10.0 s Final Gas Duration Ton 0.2/20.0 s Spot Welding Active Duration
Tof 0.2/20.0 s Spot Welding Passive Duration Crt On/Off Used to put the crater in active or passive
position.
Sub Menu Adjustment Buttons
Used to increase and decrease the duration in the selected menu.
Wire Thickness Selection Button
For the wire with 1.0 thickness led
13
, for the wire with 0.8 thickness led
14
, for the wire with 0.6
thickness led
15
lights.
Gas Mode Selection Button
Selects the gas to be used in the welding operation.
When Ar gas is selected led
9
, when Mixed gas is selected led
10
, when CO 2 gas is selected led
11
lights.
Trigger Mode Selection Button
Used to select one of the modes: position 2, position 4 or spot welding.
When position 2 is selected led
19
, when position 4 is selected led
18
, when spot welding is selected
led
17
lights.
1 5
6
7
2
3
4
11
10
9
8 12 16
15
14
13
19
18
17
3.1 User Interface
OPERATION
Operation