Magmaweld MiniStick, User Manual

Page: 22 / 124

22 miniSTICK / miniSTICK Deluxe / megaSTICK / megaSTICK Deluxe
EN
www.magmaweld.com USER MANUAL
4.3 Error Codes
• Check visually whether the fan is
working or not
• If the problem continues, contact the
authorized service
• Open the front of the air ducts
• If the problem continues, contact the
authorized service
• Fan may not be working
• The front of the air inlet-outlet ducts
may be blocked
• The machine working environment
may be too hot or stuffy
• The uptime of your machine may have
been exceeded
• Make sure that the working
environment of the machine is not
excessively hot or stuffy
• If the problem continues, contact the
authorized service
• Allow the machine to cool down by
waiting for a while. If the fault
disappears, try to use the machine at
lower amperage values
• If the problem continues, contact the
authorized service
TRR
Thermal
Protection
Error Code Error Cause Solution
Maintenance and Service