9
M A I N T E N A N C E G U I D E L I N E S
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to ensure proper function, optimized light output, and
an extended life. The frequency of cleaning depends on the environment in which the fixture
operates: damp, smoky, or particularly dirty environments can cause greater accumulation
of dirt on the fixture’s optics. Clean the external lens surface periodically with a soft cloth to
avoid dirt/debris accumulation.
NEVER
use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life.
There are no user serviceable parts inside this fixture, please refer all other service issues to
an authorized MAGMATIC service technician. Should you need any spare parts, please
order genuine parts from your local MAGMATIC dealer.
Please refer to the following points during routine inspections:
-
A detailed electrical check by an approved electrical engineer every three months, to make sure the
circuit contacts are in good condition in order to prevent overheating.
-
Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out during normal
operation, resulting in damage or injury as larger parts could fall.
-
Check for any deformations on the housing, color lenses, rigging hardware, and rigging points (ceiling,
suspension, trussing). Deformations in the housing could allow for dust or liquids to enter into the
fixture. Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure
a person(s).
-
Electric power supply cables must not show any damage, material fatigue, or sediments.
NEVER
remove the ground prong from the power cable.
Summary of Contents for Prisma Wash 100
Page 1: ...Prisma Wash 100 User Manual...
Page 22: ......
