12
I N S TA L L AT I O N I N S T R U C T I O N S
CLAMP INSTALLATION
This unit features a mounting yoke with integrated clamp attachment points, as well as a safety cable loop
located near the fluid tank (see the illustration below). When mounting this fixture to truss, be sure to
secure appropriately rated clamps (not included) to the mounting yoke, and attach a separate
SAFETY
CABLE of the appropriate rating to the safety cable loop. Please note that at least two mounting clamps
are required to securely install this device in a suspended environment.
MOUNTING CLAMP
ATTACHMENT POINT
SAFETY
CABLE
LOOP
ALWAYS ATTACH A SAFETY CABLE WHEN INSTALLING THIS
UNIT IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE
UNIT WILL NOT FALL IN THE EVENT THAT THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working load
limits, understanding the installation material being used, and periodic safety inspection of all installation
material and the device. If you lack these qualifications, do not attempt the installation yourself. Improper
installation can result in bodily injury.
Summary of Contents for MAGMA FOG 1500IP-II
Page 1: ...User Manual MAGMA FOG 1500IP II...
Page 28: ......
