(A)
(B)
(C)
INSTALLATION INSTRUCTIONS
•Uses standard 1-lb. disposable propane canisters (DOT-39 NRC).
•Prior to installing valve, become familiar with the valve function and graphics on valve
knob. Never force the knob. Always turn or push gently.
•Turn control valve to “lock”
Indicator
Off
Medium
Lock
Unlock
High
Low
and install gas canister being careful not to cross the
threads. Check for leaks prior to use, by brushing soapy water solution around
threads and orifice hole checking for bubbles.
•Position valve with gas bottle as shown
(A)
. Gently insert valve stem into valve chamber.
Rotate until valve stem key aligns with lock detent allowing valve to fully insert. Rotate gas
canister down, so knob faces you
(B)
or straight up
(C)
depending on application.
Valve will feel loose and will rotate easily. Even though the valve feels loose, it will not leak.
The valve was designed to be loose fitting in order to allow safe, easy installation and removal
of the propane canister and so it easily swings without resistance to fit all applications.
Burner
Lid Lock
Handle
Lid
Warming Rack
Grill Grates
Radiant Plate
Outer Shell
Liner
Match
Light Hole
Mount Support
Pad with
Folding Legs
Valve Chamber
Electronic
Ignition
Slide Out
Grease Tray
Control Valve
Regulator
Type 1
Medium-Output
See Magma website for replacement part numbers
and valve applications.
MagmaProducts.com
Thermometer
Single mount non-through-bolt
applications, including Style 1 “Levelock”
4 Hex head bolts & lock washers.
MOUNT HARDWARE
Fasteners are supplied for both Single
Mount and Dual Mount grill mounting
options. See Magma Catalog or Website
for best mount selection.
Dual mount applications
4 Carriage bolts & lock nuts. Only 4 bolts
required for grill mounting. Place bolts (2 per
side) diagonally from each other as shown.
Hex head bolt
& lock washer
Carriage bolt
& lock nut
Single mount through-bolt applications
4 Carriage bolts & lock nuts.
CONTROL VALVE REGULATOR
3
