Magma Automotive Molenheidseweg 10A 5451 HD Mill 0485-4713114 REV00
Type en drukfouten voorbehouden
Attention:
In some vehicles the wire of the reverse light is digitally monitored by the
on-board electronics, what can cause disturbances in the rear view camera.
In this case, please use the MA-PNF-RVC (buffer / filter ) and install it in
between the reverse light wire and the Blue wire (power cable) of the
camera.
Other sollution is to power the rear view camera by the ignition controlled
wire (+15) and switch the monitor or headunit by the reverse light wire.
Installation:
Note:
The Red power cable which is molded to the RCA videoplug and the video cable, is used to power
the camera. Please use one of these 2 Red wires only, and isolate the unused Red power cable !
MA-PNF-RVC
