Magma MG6001-5, User Manual, Page: 10 / 12

Usage
Turn the mixer handle clockwise downwards in order to start water flow. Instant hot water mixer has 2 independent
regimes – cold and hot water flows. Mixer is running in cold water flow regime when turning the mixer handle slightly
downwards – pressure of the cold water flow can be adjusted in this regime with the handle – moving the handle
downwards for bigger water flow and back upwards for smaller water flow. Mixer switches to hot water flow regime
when the handle is turned further downwards. In this regime electrical power turns on and heats the heating
element which is located into the mixer body, thereby heating the water flowing through the mixer body. Heated
water temperature depends on the pressure of the water flow – smaller the water flow, warmer the water and vice
versa.
Pressure transmitter which is built into the mixer heating unit disconnects the power supply when water pressure
falls below 0.4 BAR. For security reasons mixer will not switch to the hot water flow regime if the water pressure is
too low or water is not supplied at all.
Light indicator which is located on the body of the mixer shows in which water flow regime mixer is being used – in
cold water flow if the indicator shows yellow light and in hot water flow if red light is shown.
Spout of the mixer turns for 360 ˚ providing convenient use of the mixer.
IMPORTANT! Mixer should be left running for 5 seconds in cold water flow regime after stopping using
mixer in hot water flow regime in order to prolong the life of the heating element. In such
way the heating element is cooled and it will last longer.
Cleaning
1. It is forbidden to wash mixer during its usage. Power must be disconnected before cleaning mixer
(washing, cleaning).
2. Use water and soft fabric cloth for cleaning.
3. Cleaning products containing acetic acid, abrasive materials or sharp objects may not be used for
cleaning mixer or its nearby surfaces in order to avoid damaging chromium coating.
4. Chemical cleaning products may be used only if they are intended specifically for cleaning chrome
plated surfaces.
Hot water
flow
Cold water
flow
90 ˚