TOOLS REQUIRED
• (1) #3 PHILLIPS SCREWDRIVER
• (2) 1/2" OPEN END WRENCH
• (1) 7/16” OPEN END WRENCH
• (1) SMALL HAMMER
• (1) PAIR OF PLIERS
2
PARTS LIST
Item
Description
Qty.
Part No.
1
Handle
1
Varies
2
Frame (with black caps)
1
302956
3
RH wheel bracket
1
302954
4
LH wheel bracket
1
302953
5
Basket assembly
1
302949
6
Mounting bracket for basket assembly
2
210107
7
21-3/8" stress proof axle
1
302955
8
Wheel - 8" balloon cushion, black TPR
2
10830
9
Side channel reinforcements
2
302952
10
Caster - 5" x 1-1/4" flat tread, gray TPR
2
130063
11
Frame stub
2
301470
Hardware consists of items below:
12
Roll pin - 1/8" x 1-1/8"
2
190104
13
Carriage bolt - 5/16"-18 x 3/4" long
12
80143
14
Hex head screw - 5/16"-18 x 2-1/4" long
4
80017
15
Pan head machine screw - 1/4"-20 x 1-1/4" long
4
80104
16
Pan head machine screw - 1/4"-20 x 1-1/2" long
4
80105
17
Pan head machine screw - 1/4"-20 x 3/4" long
3
80257
18
Hex lock nut - 1/4"-20
11
80675
19
Hex lock nut - 5/16"-18
16
80676
20
Washer - 5/8"
4
80707
21
Cotter pin - 1/8" x 1" long
2
81077
Figure 1b
Figure 1a
STEP 1:
ASSEMBLE THE WHEEL AND NOSE MOUNTING BRACKETS TO THE
FRAME.
Use a workbench or table of convenient height and place all components in view and within reach.
1. Place the frame on the table so that the side with the vertical straps will be face-down. Position the RH and LH wheel brackets against
the outside of the frame side rails so that the holes in the bracket line up with the holes in the side rail.
2. Insert two 5/16"-18 x 2-1/4" long hex head bolts through both wheel brackets and through the side rails.
3. Slide the side channel reinforcements onto the bolts.
4. Slide the basket mounting brackets onto the bolts.
5. Start threading the 5/16"-18 hex lock nuts onto the bolts.
Do not tighten the lock nuts at this time!
The following assembly sequence is recommended:
302956
302954
80017
302953
302952
210107
80676
