4
Step 4
B9401
© Copyright 2018-2020 Magline, Inc.
1205 W. Cedar Street • Standish, MI 48658 USA • 1-800-MAGLINE (624-5463) • (989) 512-1000 (outside U.S. & Canada)
•
www.magliner.com
Step 5
Install the C5 stair climber (A) using the 5/16"-18 x 1-1/2" long bolt (F), washer (I) and 5/16"-18 lock nut (H).
Finger tighten only for now.
Rotate the C5 stair climber upward to meet the frame; you may need to pull outward gently at the top so that the
C5 connects with the frame.
For 39" frames: use the screwdriver to punch a hole through the red stripe. A hole will exist in the frame.
For 60" frames: drill a hole in the frame using a Ø .281 (size K) drill bit and motor. Use the hole in the top of the C5
as a guide.
Install 1/4"-20 x 1-7/8" long screw (E), spacer (B), and 1/4"-20 lock nut (G). Fully tighten to 50-60 in.-lbs. torque.
Extended View.
Please note - brake caliper, brake line and
wheel not shown for simplicity.
(3/16" Allen wrench,1/2" wrench)
(7/16" wrench and #3 Phillips screwdriver)
Step 6
Fully tighten hardware in Step 4 to 100 120 in.-lbs. torque.
B
Tip: Rotate the wheel so that
the bolt passes through a
cutout in the rotor on its way to
the washer, C5 and lock nut.
A
Allen
wrench
F
H
I
E
G
