10
Optional DC Battery Charger with mounting plate (part number 930114)
This type of charger is optional. To charge, the battery must be removed from the
Powered Stair Climber and properly positioned on the mounting plate. The green
light by itself indicates the power is on. The other three lights indicate the level of
charge:
Green- battery is fully charged, but is still being trickle charged to compensate
for the internal loss of capacity when battery is not in use.
Yellow- battery is 70-80% charged and is trickle charging
Red- battery is discharged and is charging fast
6
Operation
6.1
Ascending/Descending Stairs
Press ascend / descend button briefly until the indicator light shines green
continuously (see section 3.4 Control Box). The Powered Stair Climber is now in
the ascend mode. Select high or low speed.
Pressing the round up switch in the upper handle operates the support wheels and
will lift the Powered Stair Climber over the step continuing until the button is
released.
As the main wheels rest on the stair, immediately pull the Powered Stair Climber
back to touch the rise of the next step up.
!
Caution !
Holding the Powered Stair Climber too flat on stairs with open risers can result in
partially trapping the support wheels under the stair. This may cause excessive
pressure on the drive unit and cause unit to go into overload mode and shut
down. To resume use, press the ascend / descend button to reset.
Round up switch
Control Box (see section 3.4)
