MAGIRA MF30-C, Operating Instructions Manual

Page: 32 / 58

32
3.4 Set Temperature
To set the temperature in the cooling zone, press the
respective temperature co/-
12
.
3.5 Using the Device Without Power
Please ensure an uninterrupted power supply during operation.
The device is not designed for operation without power
supply and can only keep its temperature to a limited time,
depending on the outside temperature.
3.6 Using the Device in a Car (Battery Protection)
The device is equipped with a three-stage battery monitor.
To protect your battery, the unit switches off when the
respective battery voltage falls below (error F1).
• Use the High mode if you have connected the device to
your starter battery
• Use the
Medium mode if you have connected the device
to your starter battery and the conditions are good (e.g. no
severe cold, no severe heat, no long periods of standing)
• Use the Low mode only when using separate supply batte-
ries to ensure vehicle starting. If this mode is used when
connected to the starter battery, it may not be possible to
start the vehicle