background image

20

EN

1.  Unpack  the  unit  completely  and  remove  any  stickers  that  can 

prevent unit operation.

2.  Check the unit for damages; do not use it in case of damages.

3.  Before  switching  the  unit  on,  make  sure  that  your  home  mains 

voltage corresponds to the unit operating voltage.

4.  Wash the flask, filter, all removable parts with water and a neutral 

detergent, rinse thoroughly and dry. Wipe the body with the clean, 

damp cloth.

5.  Dry all parts of the appliance and carry out a full brewing cycle in 

accordance with the section «Brewing coffee» without filling coffee 

in the filter.

The  ready  coffee  drink  is  made  by  one-time  passing  of  hot  water 

through a layer of ground coffee in the filter.

1.  Place the appliance on a flat, stable surface.

2.  Open the lid of the water tank. Fill the tank with cold water to the 

required level, but not higher than the «5» mark, which is indicated 

on the water tank.

3.  Place the filter in the filter holder and the filter holder in the chamber 

(3).

4.  Measure the required amount of ground coffee, put it in the filter 

and close the lid.

5.  Place the flask on the platform.

6.  After  making  sure  that  the  mains  parameters  match  the  data 

indicated on the device, insert the plug of the power cord into an 

electrical  outlet.  Turn  on  the  coffee  maker  by  turning  the  power 

switch to the «l» position, the indicator will light up, the coffee maker 

will start working.

7.  When all the water has passed through the filter, turn off the coffee 

maker by setting the power switch to the «0» position (off).

8.  To keep the coffee hot, leave the flask in place and do not turn off 

the coffee maker with the switch.

Brewing coffee

When there is no need to heat the flask, be sure to turn off the 

coffee maker by moving the switch to the «0» position (off).

There will be less finished coffee, since ground coffee absorbs 

part of the water.

Do  not  leave  an  empty  coffee  flask  on  warming  platform, 

otherwise the glass may crack.

During brewing, do not open the lid of the water tank or slide the 

flask.
The appliance is intended only for preparing a drink from ground 

coffee!

Summary of Contents for MG-964























Reviews: