Magio MG-213, Instructions Manual

Page: 12 / 14

DESCRIPTION
1. Motor unit
2. Bowl
3. Bowl drive shaft
4. Bowl lid
5. Feeding tube
6. Crushing knife
7. Grating
8. Shaft adaptor
9. Plastic blade
10. Food pusher
11. Speed control switch
12. Slicing blade
13. Thin shredding blade
14. Thick shredding blade
15. Shredding blade for potato pancakes
BEFORE FIRST USE
- Pull the processor out of the package.
Make sure that there is no polyethylene in
the processor.
- Make sure the operating voltage of the
appliance corresponds to the mains
voltage.
- Unreel the cord and plug into an outlet.
USING THE PROCESSOR
1. Install the bowl on the processor.
2. Remove the protecting cover from the
main grinder knife, and install it on the
nozzle drive axis. If you want to use the
additional knife, remove the protecting
cover from the additional knife, and install
it on the main knife.
3. Put some foodstuff into the bowl.
4. Cover the bowl with the cap, and turn it
anticlockwise up to the stop.
5. Insert the plug of the power cord into
the wall outlet.
6. Switch on the processor by turning the
knob or turn on pulse operating mode by
pressing the button "PULSE".
7. After the processing is completed,
switch off the processor by turning the
knob to the position "OFF", and unplug the
power cord from the wall outlet.
8. Turn the cap clockwise and detach it,
take the knife or both knives out, remove
the bowl and extract the foodstuff out of it
by the shovel.
USING GRATINGS/CHOPPERS
1. Install the bowl on the processor.
2. Insert one of the knives in the disk-
shaped holder.
3. Install the disk-shaped holder on the
nozzle driver axis.
4. Cover the bowl by the cap and turn it
anticlockwise up to the stop.
5. Insert the power cord plug into the wall
outlet.
6. Switch the processor on by turning the
knob or turn on pulse operating mode by
pressing the button "PULSE".
7. Put some foodstuff into the neck of the
cap. Use the pusher to deliver the foodstuff
into the bowl. Press on the pusher slightly
to pass the foodstuff through the neck.
8. After the processing is completed,
switch off the processor by turning the
knob to the position "OFF", and unplug the
power cord from the wall outlet.
9. Turn the cap clockwise and detach it,
take the knife or both knives out, remove
the bowl and extract the foodstuff out of it
by the shovel.