MAGINON View 360, User Manual

Page: 18 / 38

Getting Started
19
Charging
The panorama camera can be charged with an alternating
current adapter or a power bank over a USB cable. A charge
voltage/current of at least 5V/1A is recommended. The power
LED lights up
16
red during charging by means of a USB
cable. It goes out when the battery is fully charged.
Introduction - normal operation
On/Off button
−
Switch on:
Keep the On/Off button
17
pressed for 3
seconds. The green display on the On/Off button
17
fl ashes for 8 seconds, and 2 signal tones sound. When the
video mode LED lights up
13
red, the camera is ready for
operation.
−
Switch off:
Keep the On/Off button
17
pressed for 3
seconds, 3 signal tones sound, and all displays are off.
The panorama camera remains in video mode
after switching on (when the device is switched
on, the red video mode LED
13
lights up
continuously).
Taking a photo
Activate the photo mode button
12
once. A signal
tone sounds and the photo mode LED
11
lights up red
continuously. The camera is now in photo mode. Press the
On/Off button briefly to take a photo
17
. The power LED
16
flashes once and 2 signal tones sound. The photo is taken and
saved to the memory card.