7
5. Installation
5.1. Installation of camera
The camera can be installed inside as well as on the outside of the vehicle as it is
water-proof. Inside the vehicle, the camera can be installed using the provided adhesive
pad. The camera can also be attached inside or outside the vehicle using the fixed holder.
Fix the camera at a point not impeding your rear view. It must also be ensured that the
cable is safely routed.
For fixing the camera using bolts, suitable holes must first be drilled at the place of installa-
tion. Next, bolt the holder to the supporting surface, using the supplied bolts. Then lay the
cable in its final position.
When securing the camera using the adhesive pad, first lay the cable in its final position.
Clean surface with some alcohol to remove dust and grease. Remove protective film from
adhesive pad and firmly press pad onto surface.
Turn inside the holder to correctly align camera as required.
