Start
18
Charging mobile devices
The Power Bank can be used to charge up to three devices
simultaneously. When using all outputs simultaneously the
total output voltage must not exceed 2.1A.
1. Connect a USB charging lead suitable for the device to be
charged to the respective USB connection
7
/
9
or use
the Micro USB plug
3
of the Power Bank.
2. Next, connect the USB charging lead to the device to be
charged. The charging process starts automatically.
3. If the charging process does not start automatically,
briefly depress the On/Off button
5
to start the charging
operation.
• If the device to be charged contains a Micro USB
charging lead, you can also use the Micro USB charging
lead
2
of the Power Bank.
• During charging, the current charging status is shown
by the charging LEDs
8
.
4. To stop charging, disconnect charging lead from mobile
device. The charging indication LEDs then extinguish after
approx. 20 seconds.
Summary of Contents for MPP 5200-LI
Page 3: ...3 A IN 5V 1 0A OUT 5V 1 0A OUT 5V 2 1A 1 2 ...
Page 4: ...4 B C OUT 5V 2 1A OUT 5V 1 0A IN 5V 1 0A 3 4 5 6 7 8 9 ...
Page 44: ...Notes Noticias ...
Page 45: ......