Features
15
Features
Bluetooth Function
1. Turn on the turntable and make sure the tonearm
7
is on its support
15
and
Autostop
9
is “ON”.
2. Open the Bluetooth option on your smartphone and look for the
“Maginon Turntable” Bluetooth device.
3. Connect your smartphone with this Bluetooth device.
4. Once connected, you will hear the audio signal from the turntable.
5. With the “Previous track
21
, Pause/Play/Delete
20
and Next track
19
” buttons
you can control the choice of music on the turntable.
Note
The Bluetooth function will not work unless the Autostop switch
9
is in the “On” position. When the Autostop switch
9
is turned on,
the turntable function is de-activated. When the Autostop switch
9
is turned off, the Bluetooth function is de-activated.
Recording
1. Connect a USB stick to the turntable’s USB port
17
or insert an SD card into the
card reader
16
.
2. Place a disc (see the “Turn on the turntable” paragraph).
3. To start recording, press and hold the Mode button
18
for about 2 seconds. A
beep indicates the start of the recording.
4. Place the tonearm
7
with the lever
8
on the disc. The disc is read and record-
ed on the inserted media (USB stick or SD card) in the form of an MP3 file.
5. When the recording stops, press the Mode button
18
again for 2 seconds. Two
beeps indicate the end of the recording. The recorded songs will be saved in the
“RECORD0” folder on your USB stick or SD memory card.
Note
To record other tracks, repeat the steps above.
