background image

          7

               

L25-007 Rev. 1 12/2001

6. Steamer Support, Steamer Pan Set and MagiGriddle Options

Using the Steamer Support Option

Remove the cooking grid from the side of the charbroiler to be used for steamer cooking. Place the steamer support directly on
the radiants. Sit the 4” deep water pans in the steamer support. Add water to the water pans and place either the perforated
insert pans or the solid plain insert pans into place into the water pans for steam cooking or heating/warming of food. Check
water levels in the water pans periodically when cooking with the steamer support option.

Note that:

·

Only one steamer support option group can be used with an LPAGA/LPG-30 charbroiler.

·

Two steamer support option groups can be used with an LPAGA/LPG-60 charbroiler, if desired.

·

Never use a water pan with a depth exceeding 4 ½”.

·

Never use this option as a deep fryer.

Using the MagiGriddle Option

Remove the cooking grid from one side of the charbroiler and set the MagiGriddle on the radiants and position it fully forward
against the front of the unit. The drain hole should be at the back. The space behind the griddle is for flue gases to escape.
Season the griddle as you would a fine cast iron cooking skillet.

10545C8.DWG

RADIANT

RADIANT SUPPORT PAN

3615-0294700

3615-0294800

3615-0347400

INSERT PAN

3615-0294900

PERFORATED PAN

CHAFING PAN

DOME COVER

3616-0529600

30” MAGIGRIDDLE

5109-0344701

30” STEAMER SUPPORT

Summary of Contents for LPAGA/LPG & CG

















Reviews: