1) OVERVIEW
Thank you
for choosing the M
AGIK
M
INDER
MM100 automatic liquid level chemical proportioner. The
M
AGIK
M
INDER
is a non-electric device that automatically maintains the level and concentration of a
solution reservoir. To obtain the best performance from you M
AGIK
M
INDER
, please read the instructions
thoroughly before proceeding. In addition, please observe all warnings and cautions printed on the
chemical’s label regarding proper use and handling.
2) PACKAGE CONTENTS
✓
Proportioner valve assembly with U-clamp and thumbscrews for mounting.
✓
Weighted float with ball chain.
✓
Suction tube with foot valve and strainer.
✓
Discharge tube.
✓
Metering tip kit.
✓
Instruction manual.
3) IMPORTANT INFORMATION
➡
It is advisable to wear protective clothing (i.e. gloves) and eyewear when dispensing potentially
hazardous chemicals. Also ensure that reservoirs used for proportioning are of suitable
construction and/or size. Wear protective clothing when cleaning and maintaining your
equipment if hazardous chemicals are being used.
➡
It is not
advisable to use the M
AGIK
M
INDER
on other non-hazardous chemical applications after it
was used with hazardous chemicals. This is especially true when health or safety might be a
concern. For example, do not use your M
AGIK
M
INDER
for dishwasher soap after it has been
used for insecticide. It would be advisable to have two separate proportioners for this purpose.
➡
Attach the M
AGIK
M
INDER
to standard tap water outlets only, with no more than 85 PSI maximum
and no less than 25 PSI minimum.
4) PACKAGE CONTENTS
For the following instructions, it may be of assistance to refer to the exploded view on the last page of
this manual.
1.
Select metering tip (refer to section
Metering Tip Selection
) and insert tip (MM11) into metering
tip fitting on eductor (MM10).
2.
Slide open end of suction tube (MM18a) over the metering tip fitting on eductor.
3.
Attach end of discharge tube (MM17a) with clamp and flooding ring to discharge barb on
eductor.
