REMOTE CONTROL INSTRUCTIONS
PAIRING:
Turn on the light, press and hold the "
○
""
□
"
buttons on the remote for about 10 seconds until
the indicator alternately flashes blue to enter
pairing mode. Then, close the remote to the light
button until the“
”icon shows on the OLED
screen for 2 seconds and the remote's indicator is
constantly blue for 2 seconds, confirming a
successful pairing.
REMOTE CONTROL OPERATION:
ON/OFF: Press and hold the "
○
"/"
□
" button for 1
second
ADJUST BRIGHTNESS: Click the "
○
" button
CHANGE MODE: Double click the "
○
" button
FULL OUTPUT MODE (1500LM): Click the "
□
"
button to go into Full Output Mode and click the
"
○
"/"
□
" button to return to the previous mode.
CHECK BATTERY LEVEL: Click the "
○
"/"
□
" button
*In lockout mode, press the "
○
"/"
□
" button, the
LOCKOUT icon will be displayed on the OLED
screen, and the light will not light up.
CHANGE MODE:
Double click the switch to change between constant
mode and flash mode.
SMART MODE:
During the daytime, the DRL is always on and the
main light will be off. At nighttime, the DRL and the
main light will light up together. (The smart mode is
off by default, activate it through the APP)
*In the factory default mode, when the light sensor is
on, the OLED screen will display the smart mode icon.
SLEEP MODE:
The light will enter sleep mode after 5 minutes of
inaction and be automatically activated on any
vibrations. (The sleep mode is off by default, activate
it through the APP)
LOW POWER MODE:
When the battery power is lower than 10%, the light
will automatically turn to LOW mode and cannot be
adjusted. Charge the light as soon as possible.
