Magicfx FX-ARM CONTROLLER, User And Installation Manual

Page: 7 / 16

MAGICFX ®
FX-ARM CONTROLLER
— User and Installation Manual
7
2
ARM SAFELY!
The MAGICFX ® FX-ARM CONTROLLER has been designed and constructed in such a
manner that it can be used safely. This applies to the use, the circumstances and the
regulations as described in this documentation. Reading this documentation and
following the instructions are therefore necessary for everyone who is authorised to
work with the MAGICFX
® FX-ARM CONTROLLER.
The MAGICFX ® FX-ARM CONTROLLER must be used in surroundings that:
• Have a stable temperature of between -10 and 50 °C.
• Are free of dust, corrosive gases and high concentrations of organic vapours.
• Are not situated in the vicinity of a source of vibration.
2.1
GENERAL SAFETY RULES
• Only authorised persons may carry out work with the MAGICFX ® FX-ARM
CONTROLLER.
• Do not use the MAGICFX ® FX-ARM CONTROLLER if there are people or animals
in the direct output of FX-machines controlled by the MAGICFX ® FX-ARM
CONTROLLER.
• Make sure that children, unauthorised people and animals do not obtain
access to the MAGICFX ® FX-ARM CONTROLLER.
• Make sure there are no free-standing objects or objects that can be
damaged by the connected machines within the output distance.
• Do not remove any safeguards, safety caps and safety symbols.
• All required safety devices must be in good condition and function properly.
•
Ensure sufficient lighting of the surroundings.
• Keep the workplace clean.
• Refer to the manual(s) of the connected machine(s) for safety instructions
concerning the use of those machines.
2.2
CONNECTING FX-MACHINES
The MAGICFX ® FX-ARM CONTROLLER uses Arm cables terminated with RJ45
connectors to link to single or multiple effects machines. This is not compatible with
any other data protocol and these cables must not be connected to any other
product other than specific MAGICFX
®
effects machines with the integrated safety
circuit hardware. Connecting RJ45 leads from other systems carrying other data
protocols may damage your hardware.
2.3
PRECAUTIONS FOR OPERATION
WARNING
Using a damaged MAGICFX ® FX-ARM CONTROLLER can lead to
death, serious injury or property damage. Always inspect the
controller thoroughly before operation.