Version 1.1
Page 14
11. USAGE
TIP:
This provides you with suggestions and advice on how to perform tasks
in an easier or more convenient way.
CAUTION:
This indicates that the equipment may be damaged if procedures are not
carried out in the proper manner.
DANGER WARNING:
The MAGICFX® CO2 Dominator may only be operated by authorized
adults.
The CO2 Dominator may only be operated if all parts are entire and in
good working order and properly connected/installed.
U will see the Channel of CO2 1 flashing.
This is the first address of a sequence of
5. For example if you install DMX address
10, the first CO2 output will be 10, the 2
nd
will be 11, the 3
rd
will be 12 etc.
Install the DMX address for the first CO2
output by using the
▲ or ▼ button.
Press
to confirm and save your
settings.
1
1.
The display will now show the image as
showed left.
You will see the w
ord ‘Safety’ flashing. This
is the safety channel to activate the CO2
Dominator.
Ue
the ▲ and ▼ buttons to choose the
desired DMX address.
Then press
to confirm your settings.
When you control multiple machines, it is
recommended to use the same safety
channel for all units.
1
0.
