www.magicard.com
RIO 2e, TANGO 2e & TANGO +L Printers USER MANUAL
Page 5 of 33
9.
Print a test card
1. Switch the printer on. You will hear some motor activity and see the
indicators flash.
2. When ready, the red Error indicator should be off and the green
indicator on.
3. Press and release the small test push button on the
rear panel once.
4. After several seconds, the printer will print a test
pattern on a card, and feed it to the card output
stacker. This indicates that all is well with the
printer, i.e. cards loaded, dye film loaded, power
is on and lid is closed.
10.
Load the CD into your PC
Turn to page 6 for full instructions on how to install the printer drive
CAUTION.
Only connect one interface (USB or
Ethernet or Parallel) to your PC. Do not connect
multiple interfaces, as this can cause incorrect
operation.
On completion of installation,
you will be able to print cards.