16
P160 User Manual
Serial Comm
PC Connection
1.
Serial port: When serial port
（
RS232/RS485
）
is used for communication of device and PC,
this setting need to be checked:
2.
Baudrate: Used for communication with PC.
RS232 is recommended for high speed.
3.
Note: There are 5 baudrate types available for
RS232: 9600, 19200, 38400, 57600 and 115200;
“9600” is not applicable to RS485. Reboot the
device to make the change active.
To improve the security of attendance data, connection password needs to be set here. Enter into
Comm.
“PC Connection”
ADMS
1.
Comm Key: Set 1-6 digits connection
password, the password must be input when
PC software is to connect device to read data.
2.
Device ID: The ID is in the range of 1-254. If
RS232 or RS485 is enabled, this ID needs to be
input in the software communication interface.
Settings used for connecting with ADMS server. Enter into “Comm”
“Cloud Server Setting”.
1.
Enable Domain Name: When the domain
name mode is enabled, you access a website
using a domain name in the format of http://;
otherwise, you must enter an IP address for
website access.
2.
Server Address: IP address of Webserver
3.
Server port: Port used by Webserver
4.
Enable Proxy
Server:
When you enable the
proxy function, set the IP address and port
number of the proxy server. This option
indicates whether to use a proxy IP address. You
may choose to enter the proxy IP address or the
server address for Internet access, whichever
you like.
