3
2
TABLE OF CONTENTS
Safety................................................................................................
p . . 3
Service, cleaning and operation........................................................
p . . 4
Assembly & starting procedure.........................................................
p . . 5
Warning logos on your screed .........................................................
p . . 6
Honda engine ...................................................................................
p . . 6
Magic screed assembly.....................................................................
p . . 7
Parts book.........................................................................................
p . . 8
p. . 9
Magic screed parts assembly............................................................
p . 10
p . 11
p . 12
p . 13
Air powered screed...........................................................................
p 14
Ec declaration of conformity.............................................................
p 15
MAGIC SCREED PARTS BOOK & OWNER’S MANUAL
Congratulations on your selection of
Magic Screed.
Magic Screed is manufactured for contractors and entrepreneurs in need of a
dependable, user friendly, high productivity tool to operate for leveling and smoothing
wet concrete.
Any other use of this tool could damage it or even cause injuries or
death to the operator and surrounding coworkers.
Unfortunately, it is impossible to warn you about all the hazards associated with
operating or maintaining a powered screed.
You must use your own good judgement.
This manual and the
Honda engine manual supplied with your Magic Screed should
always remain with the equipment.
Safety instructions, assembly, maintenance and
parts lists are included.
For your own
safety, and that of your coworkers, it is required that anyone operating
or servicing the screed, read and understand the safety instruction in this manual.
Failure
to do so could result in personal
injury, death or equipments damage
.
SAFETY
1
- Read and understand the owner’s manual before operating or servicing the screed
2
- Have a first aid kit available in case someone gets injured
3
- Wear the appropriate safety gear (according to your local requirement)
Suggested list of protection gear
-
Hardhat
-
protective boots
- protective
goggles
- gloves
-
hearing protection
3
-
Carbon monoxide hazard:
Exhaust gas contains poisonous carbon monoxide. Avoid
inhalation of exhaust gas. Never run the engine in a closed or confined area without
proper ventilation
4
-
Burns from hot parts:
Let the engine and exhaust system cool before touching.
5
- Do not put your hands on any vibrating of moving parts.
6-
Refuelling:
refuel with care. Gasoline is extremely flammable, and gasoline vapor can
explode.
Refuel outdoors, in a well-ventilated area, with the engine stopped. Never smoke
near gasoline, and keep flames and sparks away. Always store gasoline in an approved
container. If any fuel is spilled, make sure the area is dry before starting the engine.
Use unleaded gasoline with a pump octane rating of 86 or higher.
Transporting:
if the engine has been running, allow it to cool off for at least 15 minutes
before loading the screed on a transport vehicule. A hot engine and exhaust system
can burn or can ignite some materials.
