（
V1.0
）
9
Make the device at the ON position (no need to connect 2.4G receiver to USB interface)
Press the key
when using, release the hand, the laser will automatically shut down. So, if you
want to continue to open the laser, you need to always press the laser button.
4.7.
RF matching
The device was set well by factory , you can ensure that different users on the same occasion using both
2.4G devices won’t interfering with each other. However, if in special circumstances, the interference
situation happened, you can change channels to avoid interference according to the following operation:
under the connection state, pressing the two keys
about 10 seconds after the lights began
to flash slowly, let slip the key, the flash will get quick, when the flash slow again, the channel was
changed.
6.
Appendix
6.1.
Technical parameters
Main Specification
D
i
mension: 151mmX59mmX12.5mm / 6'X2 .4 'X0.5'
Weight: 100g/0.22poud
Suitable temperature: -10
℃
to +55
℃
Battery Type: Built-in lithium-ion battery
Standby time: 500 ~ 700 hours
Operation range: up to 30 meters
Modulation: RF using DSSS mode, a stronger anti-jamming capability
Transmit Power: Max +4 dBm
Operating Voltage: 3.3V
Operating Current: <80mA
Charge voltage: 4.2V - 5.05V
Charge current: <300mA
Sleep Current: <1mA
Computer system requirements
Windows 2000
Windows XP
Windows Vista ,Windows CE, Windows 7
Linux(Debian-3.1,Redhat-9.0 Ubuntu-8.10 Fedora-7.0 tested)
6.2.
Maintenance
Battery Caution
Do not try to disassemble the machine or replace rechargeable batteries without permission,
otherwise the resulting loss has nothing to do with the manufacturer.
Battery charging time depends on the remaining battery capacity and battery / charger type.
