MAGIC-PRO MP-6VIP-C2
16
2-5.1 J1 SWITCH SIGNAL SUMMARY
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15
J2
J1
PIN 13
+5V
HDD LED CONNECTOR
PIN 23
HDD LED SIGNAL
PIN 33
HDD LED SIGNAL
PIN 43
+5V
DESCRIPTION
This connector supplies power to the cabinet's IDE
activity LED. Read and write activity by devices
connected to the Primary or SecondaryIDE
connector will cause the LED to light up.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
J2
J1
INFRARED CONNECTOR
PIN 63
INFRARED TRANSMIT SIGNAL
PIN 73
GND
PIN 83
INFRARED RECEIVE SIGNAL
PIN 93
NONE
PIN 103
+5V
DESCRIPTION
This connector supports an optional wireless
transmitting and receiving infrared module. This
module mounts to a small opening on system cases
that support this feature.
User must also configure the setting through
BIOS program "Peripheral Setup" to select whether
UART2 is directed for use with COM2 or IrDA.
Use the five pins and connect a ribbon cable from
the module to the motherboard's IR connector
according to the pin definitions.
