7
3.2 MARQUEE ASSEMBLY
Two persons may be required for marquee assembly. To install the marquee you first need to open the
rear upper door. Set a ladder or other platform on the back of the unit.
Raise the marquee up, climb onto the platform and
place the marquee base brackets in the holes on
top of the unit. Pass the backlight power cord
through the hole.
Secure marquee by placing the screws in the holes
(1 and 2). Tighten the screws. Connect the power
cable connectors (3).
3.3 LEVEL ADJUSTMENT
Install this machine on flat surface. Adjust levers to lift casters off the ground to level the game.
If the game is installed on an unstable floor, it could cause a malfunction.
To fix the game, adjust the leveler down until it touches the floor, lifting the casters off the ground by
5mm. Repeat the same for all levelers.
NOTICE: Make sure the machine is level with the ground and all the adjustable legs
should stick to floor closely.
3.4 PLAY ZONE
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon instalation:
Service area: 50cm
Play area:
100cm