LUCKY NUMBERS -
USER’S MANUAL
www.magicplay.eu
4
Avoid installing in the following places to prevent fire, electric shock, injury and/ or
machine malfunctioning:
•
Places subject to rain/moisture, or places subject to high humidy.
•
Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to
ensure that it is used within the specified operating range.
•
Places where inflammable gas may be present or in the vicinity of highly inflammable/
volatile chemicals or items that can easly catch fire
•
On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents.
•
Vicinty of fire exist, fire extinguishers.
WARNING!
Non-technical personnel who do not have technical knowledge and experience
should refrain from performing such work that this manual require or perform
tasks which are not explained in this manual. Failing to comply can cause severe
accidents such as electric shock or other serious injuries.
WARNING: To reduce the risk of fire, electric shock or personal injury, unplug or
disconnect the machine from the power supply before servicing.
2. SPECIFICATIONS
Rated power supply:
110 - 240V (must be selected on power supplies)
Dimensions:
77 cm x 115 cm x 245 cm / 30/7” x 45,3” x
Weight:
150KG / 331 lbs
96,4”
NOTICE: After turning off the game, please wait at least 1 minute before restarting again.
Inspect Immediately after Transporting the Product After receiving the shipment, inspect the product
thoroughly to ensure that it has been shipped with care. Before turning the power on, please check the
following:
•
Check the cabinet for damage or shifting that may have occurred during shipping. Are there any
dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
•
Are all the legs and adjusters/levelers/feet intact?
•
Do the power supply voltage and frequency requirements meet with those of the location
(110V/220V)? Are all wires linked correctly and securely connected to each other? If coupled in an
incorrect manner, the connection will not be made accurately and it could cause not only
irreparable damage to the machine, but also is a potential fire hazard. DO NOT INSERT
CONNECTORS FORCIBLY.
