14 MAGICFX® SMOKEBUBBLE BLASTER
—
User and Installation Manual
2
BUBBLE SAFELY!
The MAGICFX
®
SMOKEBUBBLE BLASTER has been designed and constructed in such a manner that
it can be used safely. This applies to the use, the circumstances and the regulations as described
in this documentation. Reading this documentation and following the instructions are therefore
necessary for everyone who is authorised to work with the MAGICFX
®
SMOKEBUBBLE BLASTER.
The MAGICFX
®
SMOKEBUBBLE BLASTER must be placed and used in surroundings that preferably:
• Have a reasonably stable temperature of between 5 and 50°C.
• Have a relative humidity degree of no more than 90% (non condensing).
• Are reasonably free of dust, corrosive gases and high concentrations of organic vapours.
• Are not situated in the vicinity of a source of vibration.
2.1 GENERAL SAFETY RULES
• Only authorised persons may carry out work with the MAGICFX
®
SMOKEBUBBLE BLASTER.
• Do not use the MAGICFX
®
SMOKEBUBBLE BLASTER if there are people or animals in the direct
output.
• Make sure that children, unauthorised people and animals do not obtain access to the
MAGICFX
®
SMOKEBUBBLE BLASTER.
• Do not connect more units to a single electrical circuit than the installed fuse is able to
handle. (Calculate the summed load with the electrical data from Section 1.2)
• Do not remove any safeguards, safety caps and safety symbols.
• All required safety devices must be in good condition and function properly.
•
Ensure sufficient lighting of the surroundings.
• Keep the workplace clean.
2.2 INDOOR USE
The MAGICFX
®
SMOKEBUBBLE BLASTER is designed for outdoor use and use in well-ventilated indoor
spaces.
WARNING
Do not use the MAGICFX
®
SMOKEBUBBLE BLASTER in poor ventilated confined
spaces. Exposure to high levels of smoke can cause skin irritation and may
obscure visibility.
